The Pile Head is the point where the pile is connected to the structure. Consisting of a plate, with a designed dimension and two spherical collar nuts. Whether for sheet piling anchorages, as piles under reinforced concrete foundations or for stabilising slopes with soil nails and nets/shotcrete, we can provide the right head for every application.
Hollow Steel Bar
The ribbed steel tube made from fine-grain structural steel functions as sacrificial drilling rod, injection tube and reinforcing bar. The low number of components guarantees effective working and flexible adaptation to site and ground conditions.
The coupling nut can accommodate both repeated loadings and dynamic load changes - made possible by the central stop. Tightening against the central stop also achieves an optimum transfer of the blow energy during drilling.
The centralizers are fitted ahead of each coupling nut and are used to maintain the direction and stability of drilling. The centralizer also ensures that a consistent encapsulation of grout around the bar is achieved whilst drilling. For permanent applications sufficient grout cover is of paramount importance in permanent corrosion protection.
Sacrificial drill Bit
Titan drill bits all have lateral venturi holes that allow the grout to fill up or flush a borehole whilst drilling. Ranging from hardened clay bits to carbide button bits, Ischebeck Titan Ground Engineering have a range of drill bits to suit most ground conditions.
Thanks very much for a really interesting and practical presentation – much appreciated. There were some really interesting insights (and benefits of the Ischebeck Titan bars), particularly the grout cover estimations and the grout corrosion protection allowance approach.
Andrew Lowes, Senior Geotechnical Engineer
Sweco UK Limited
Big thanks to Colin Thompson at Ischebeck Titan GE for hosting a great CPD webinar - we had the whole team tuned in and learned a lot!
Alan White Design Ltd
Alan White Design Ltd, Kilmarnock, Scotland
The presentation was concise and informative to illustrate the use of Titan bars to a wide application of ground engineering solutions.
JAMES BINNS, Director
Byland Engineering Limited
Glad that we went ahead with the seminar. It was very informative and the timing was great with the release of the software.
GERARD O’SULLIVAN, Chartered Engineer
David Kelly Partnership